---
title: "Frequently Asked Questions"
output: rmarkdown::html_vignette
vignette: >
  %\VignetteIndexEntry{FAQ}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r setup, include = FALSE}
knitr::opts_chunk$set(
  collapse = TRUE,
  comment = "#>"
)

options(rmarkdown.html_vignette.check_title = FALSE)

```

Below are some frequently asked questions about the **logr** package. Click
on the links below to navigate to the full question and answer content.

## Index{#top}

* [Where is my log?](#location)
* [How come it didn't log anything?](#nolog)
* [How do I change the name of the log?](#name)
* [How do I add a timestamp to the log name?](#timestamp)
* [How do I log my code?](#code)
* [How do I turn on symbolgen?](#symbolgen)
* [How do I log environment variables and their values?](#environment)
* [How do I turn off the notes?](#notes)
* [How is put() different from log_print()?](#put)
* [What are the "Base Packages" and "Other Packages" lines in the header?](#packages)
* [How can I get rid of the blank lines?](#compact)
* [How can I get rid of the traceback?](#traceback)

## Content

### Where is my log? {#location}

**Q:** I followed the examples to add **logr** functions to my script, and I think
I created a log.  But I can't find it.  Where does the log go?


**A:** It depends on what you passed to the `file_name` parameter on the 
`log_open()` function.  

If you passed nothing, the log will be created in a subdirectory 
named "log" in the same directory as your program, and with the program name.  

If you passed a file name without a path, the log subdirectory will be created
in your working directory, and the log will be named with the name you 
assigned it.

If you passed a full path, it will be created in the full path, but will still
be created in a subdirectory named "log" unless the `logdir` parameter on
`log_open()` is set to FALSE.

If you still can't find it, add the following line to your program someplace
after the call to `log_open()`:

```
print(log_path())
```
Then rerun the program.  The path to the log will be printed to the console.

Note that the `log_open()` function also returns the path to the log.  You can
save this path in a variable for easy access, like this:

```
pth <- log_open()
print(pth)
```

[top](#top) 

******


### How come it didn't log anything? {#nolog}

**Q:** I am able to create a log.  But it doesn't contain anything.  Just
a header and footer.  How come nothing was logged?

**A:** The **logr** log is not a fully automatic log, such as a SAS® log.
The primary way to get something logged is to log it explicitly with 
`log_print()` or `put()`.  This is the only way to guarantee that something
will be logged.  Generally, if you want a complete log, it is best to 
sprinkle these functions liberally throughout the program, logging anything 
you feel is relevant.

The other way to get something to log is by using the **autolog** feature.  This
feature can be turned on in one of two ways:  
1. Set the `autolog` parameter on the `log_open()` function to TRUE.  
2. Set the "logr.autolog" option using an `options()` function, like so:  
```
options("logr.autolog" = TRUE)
```
The autolog feature will automatically log function calls from the **dplyr**,
**tidyr**, and the **sassy** family of packages.  It will not log Base R 
functions, or the functions from any other packages.  It takes some experience
to understand which functions will be automatically logged, and which will not.

To maximize the autolog feature, it is a best practice to use **tidyverse** 
functions, rather than the Base R equivalents.  These functions stand a better
chance of being logged automatically.  

It is also a best practice to place a `put()` statement at the end of your
**dplyr** pipelines.  This is a very good habit to develop, and will greatly 
improve the quantity and quality of your logs.  Here is an example:
```
dat <- mtcars %>% 
       subset(mpg < 20) %>% 
       arrange(mpg) %>% 
       put()

```
Note that the above `put()` statement has no effect on the resulting data frame.
It simply logs the pipeline result before assigning it to the variable `dat`.

[top](#top)

******


### How do I change the name of the log? {#name}

**Q:** I have a log. But I don't want the default name.  How can I change it 
to something else?


**A:** The `file_name` parameter on the `log_open()` function controls the log
name.  You can set this parameter to be any log name you like.  When the log
is created, it will use the name set on this parameter.  Example:
```
log_open("MyCustomName.log")
```

[top](#top)

******

### How do I add a timestamp to the log name? {#timestamp}

**Q:** I have an R program that runs on a schedule every day. I want to keep
the logs from this program for a certain period of time.  But **logr** always
overwrites the log from the last run. Is there a way to get a datestamp
on the log name, so it won't overwrite?


**A:** You can append the datestamp to the log name on the `file_name`
parameter.  Like this:
```
# Concatenate log name with datestamp
nm <- paste0("mylog_", format(Sys.Date(), "%Y-%m-%d"))

# Open log
lf <- log_open(nm)

```
Then **logr** will not delete the previous day's log.  

If you want a full date and time stamp,
adjust the codes on the `format()` function to your liking.  

[top](#top)

******

### How do I log my code? {#code}

**Q:** In SAS® there is an option to log all the code in my program at the 
top of the log.  I like this because it is a good record of my program
at the time it was run.  Is there a similar option in **logr**?


**A:** There is not an option, but there is a `log_code()` function that will
allow you to accomplish the same thing.  You just call the `log_code()` 
function at the point where you want the code logged.  Normally this would
be at the top of the program, after the call to `log_open()`.  Like this:

```
# Open log
log_open("mylog.log")

# Dump code to log
log_code()

# Continue program...

```
The above code will dump the entire program contents to the log.  The code lines
will be prefixed with a right arrow (">") to distinguish these lines
from the rest of your log.

[top](#top)

******

### How do I turn on symbolgen? {#symbolgen}

**Q:** In SAS® there is an option called _symbolgen_ that will log all the
variable values in my program.  This option is useful for debugging.  Is there
a similar option in **logr**?


**A:** Not really.  You can log the values of individual variables by sending
them to the log with a `put()` function.  You can also log the entire 
environment with all variable values like this:
```
# Open log
log_open("test.log")

# Write current variables to log
put(ls().str())

# Close log
log_close()
```
Otherwise, it is better to debug R programs interactively.  The interactive
debugging features in R are much better than in SAS®.  The **logr** log is geared
more toward recording the execution of your program than debugging.

[top](#top)

******
### How do I log environment variables and their values? {#environment}

**Q:** I want to write all the environment variables and their values to 
the **logr** log.  Is there a way to do that?


**A:** There is no built-in feature to log the environment variables.  But there
is a Base R function `Sys.getenv()` that will retrieve the environment variables
and their values.  Then you can put them to the log like any other object:
```
# Open log
log_open("test.log")

# Send environment variables to log
put(Sys.getenv())

# Close log
log_close()
```

[top](#top)

******

### How do I turn off the notes? {#notes}

**Q:** The notes are cluttering up my log, and are not providing anything
that I need.  I don't need the elapsed time, etc.  How can I turn them off?


**A:** The notes can be disabled in one of two ways:  
  1. Set the `show_notes` parameter on `log_open()` to FALSE.  
  2. Set the `logr.notes` option to FALSE using an `options()` function.  Like
   this: 
```
   options("logr.notes" = FALSE)
```

[top](#top)

******

### How is put() different from log_print()? {#put}

**Q:** There is another function `put()` that seems similar to `log_print()`.  What
is the difference between them?

**A:** There is no difference in functionality.  `put()` is a direct alias of 
`log_print()`.  The only difference is that `put()` is faster to type.  It is also
easy to remember for anyone who has used SAS® software.  The `put()`
function in the **logr** package does the same thing as the `%put()` function in SAS®.
So this alias will warm the hearts of current/former SAS® programmers.

[top](#top)

******

### What are the "Base Packages" and "Other Packages" lines in the header? {#packages}

**Q:** Recently I noticed the "Base Packages" and "Other Packages" lines show up
in the log header.  What are these lines?  Are they supposed to have all my 
referenced packages?  How come some are missing?


**A:** The "Base Packages" and "Other Packages" lines in the header 
are attempting to more fully
describe the environment the program/script is running in.  They are showing
the packages that are installed and attached at the point the `log_open()` 
function was called.  

The information from these lines is taken from Base R `sessionInfo()`, and 
shows a subset of information from that function.  This information is being logged
so that you have some record of the packages and versions that were in
use at the time the script was ran.  This is useful information if
you need to recreate the output from a particular point in time.

Note that if you attach packages in the middle of the program, after the 
call to `log_open()`, these packages may not be recorded in the header.  It is 
therefore best practice to place all of your `library()` calls at the top of
your program, load up everything you need, and then call `log_open()`.  This 
practice will help ensure that the header contains all the packages that are
used by your program.  This practice also makes your program easier to read,
understand, and maintain.

[top](#top)

******

### How can I get rid of the blank lines? {#compact}

**Q:** I want to remove the blank lines in the log, to make it as small
as possible.  I see there is a 'blank_after' parameter on `log_print()` to
remove the blank line for a single log entry.  But how can I get rid of all of
them?

**A:** There is a parameter on the `log_open()` function called "compact" 
that will remove all the blank lines between log entries.  Simply set
compact = TRUE to remove all blank lines from the log.  You may achieve 
the same result by setting the global option logr.compact = TRUE.

[top](#top)

******

### How can I get rid of the traceback? {#traceback}

**Q:** The traceback is dumping a huge amount of stuff into the log when 
there is an error.
There is so much stuff, that I find this feature annoying and useless. How
can I turn it off?

**A:** There is a parameter on the `log_open()` function called "traceback" 
that you can use to turn off the traceback messaging.  Simply set
traceback = FALSE. The global option logr.traceback = FALSE will do
the same thing.

[top](#top)

******